softener roBoth Water Softener and Reverse Osmosis systems are quite essential in our homes. A water softener is useful if you live in an area with hard water. It helps reduce water hardness by getting rid of the salts – calcium and magnesium. Salt-free water is best for washing clothes and bathing. No dingy gray color on the fabric and your skin and hair are left feeling soft and natural.

Ro water is simply purified water used for drinking and other domestic purposes. The system removes harmful contaminants such as heavy metals and microorganism, making the water safe for human consumption. The benefits of having purified and softened water are many including disease prevention and reduced costs of buying soaps and shampoos. Note that, hard water uses more soap.

With the many advantages at your fingertips, a damaged water softener or RO system is the last thing you would want to see. In order to ensure that your softener stays healthy, here are the six steps to follow always;

Step 1: Use pure salt iron remover

water softener healthThis is one of the common things many people overlook when it comes to maintaining a healthy water softener. Some homeowners use the standard rock salt because it is relatively cheaper, but they realize the mistake when it is too late. The rock salt creates a thick accumulation of sediments in the brine tank. This is harmful to the unit because the debris can clog the control valve and the injector. So, pure salt is the best for keeping your softener clean.

Step 2: Add salt when necessary

If you have been using a water softener, probably you have made several mistakes. However, doing blunders is not the right way to learn how to keep your unit healthy. When the salt is used up, more salt is required which is accompanied by refilling the tank. However, you should only add more salt when the salt in the tank is almost finished. This will prevent salt buildup at the bottom of the tank.

Step 3: Refill two-thirds full tank

Once you have added salt, you need to refill the tank. However, avoid exceeding above two-thirds of the tank.

Step 4: Use Iron-Out for cleaning your softener

iron outIf the water contains iron, the resin bed may produce a bad odor after several months of use. The dirt sticks on the resin bed, as well as on the control valve. This means the parts should be cleaned to keep your softener healthy. The Iron Out is highly recommended for cleaning, and you should use it once a year for best results.

Step 5: Clean the brine tank every other year

The buildup salt at the bottom of the tank should be removed once a year. The addition of more salt is the main cause of salt buildup, and that is why you are advised to add more once the salt in the tank is almost finished. Since the salt is hardened, you need to remove it using a broom while those tiny sediments can be removed using a shop vacuum. Clean the tank using soap and water, and then rinse thoroughly.

Step6: Ensure the softener’s drain line is well installed

When installing the drain line, avoid pushing its end into the floor drain. This is important because the drain may suck-up sewage into the softener from the main drain line.

Reverse Osmosis System

reverse osmosisIn most cases, the municipal water has minerals, microbes, salts, and metals. These substances alter the normal taste and odor of water, and therefore the water quality is affected. The Reverse Osmosis (RO) system addresses these problems by removing those elements through a purification process. The RO water is safe and healthy for human consumption.

Reverse Osmosis system sometimes may fail. The purifiers may get damaged such that there is no water production, or there is very little water flow. Even though there are other problems that can occur in an RO system, the most common one is the low flow or low water production. You can choose the most suitable reverse osmosis system for your home here on

How to Fix Low Flow/Low Water Production in Reverse Osmosis System

low flowIf the reverse osmosis membrane is fouled or the filtration cartridges are clogged, they need to be replaced because they are some of the major causes of low flow or low water production.

When the incoming water pressure is below 40 psi, there are high chances the water production will be low. However, carbon filters work well even when pressure is as low as 10 psi as long as the feed water valve is turned on.

If the RO system tank is defective, you will notice the water flow is quite low. Even though the tank might contain the RO water, the low air pressure inside makes it difficult to push water to the tap or faucet.

Tubes of the RO system might have several folds at different points. These should be repaired by straightening the kinked areas.